TP-XXL BLACKOUT
$429.80
(VPP10478)
The TP-XXL BLACKOUT is a closable extra-large tool pouch designed with integral side mounted padded meter pockets. Each zippered meter pocket will securely fit meters up to 260mm x 90mm x 50mm.
The TP-XXL BLACKOUT comes with the V-SWAP Front Tool Panel, V-SWAP Rear Tool Panel, and the V-SWAP 2-Bit & 4-Bit Pocket Panels. Additional panels are available and sold separately.
SEE OUR V-SWAP™ PANELS OPTIONS BELOW
Veto Pro Pac’s proprietary V-SWAP™ system enables quick customisation for the needed tools, gear and equipment.
The all-black tactical construction of the BLACKOUT edition discretely conceals additional V-SWAP capabilities. V-SWAP panels inside the TP-XXL BLACKOUT enable the removal of all internal pockets to create a custom layout, easy clean-out and/or the storing of larger equipment in addition to a variety of tools, meters, fasteners, small tablet computer.
The TP-XXL BLACKOUT comes with the V-SWAP Front Tool Panel, V-SWAP Rear Tool Panel, and the V-SWAP 2-Bit & 4-Bit Pocket Panels. Additional panels are available and sold separately.
Add a custom panel to your bag
Panels
Panels
Panels
| PRODUCT SPECIFICATIONS | Width: 380mm Depth: 205mm Height: 380mm Weight (empty): 3.25kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | 47 available pockets Tactical all-black construction V-SWAP™ removable tool pocket panel system Includes rear tablet pocket & 2 padded meter pockets “Hang-up” hook – accessible while open and closed Over-moulded rubber grip Padded shoulder strap YKK® zippers High Impact Polypropylene plastic base |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Only logged in customers who have purchased this product may leave a review.
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Tool Pouches
Tool Pouches
Tool Pouches
Tool Pouches
Reviews
There are no reviews yet.