MB5B Tester Bag
$437.80
(VPP10531)
The MB5B Tester Bag is an extra large and highly-configurable front accessed bag designed for a Multifunction Tester (MFT). Once the bag is loaded out, it can be worn over both shoulders using the included backpack straps, over a single shoulder using the optional padded shoulder strap (sold separately), or at your side with over-moulded gripped handle.
MB5B Tester Bag comes with 1x Front Padded Panel, 1x Rear Padded Panel and 1x Large Side Pocket Inserts, 1x PB2-8 MAG Parts Bags and 1x MFT Accessory Box included with purchase.
SEE OUR V-SWAP™ PANELS OPTIONS BELOW
Veto Pro Pac’s proprietary V-SWAP™ system enables quick customisation for the needed tools, gear and equipment.
Out of stock
Want to know when it's back in stock?
The bag features an additional 8 pockets on the front flap as well as a padded tablet computer pocket on the back. The MB5B is offered in two configurations: MB5B Tool Bag for technicians in the United States and MB5B Tester Bag for technicians in the UK, Europe and the rest of the international professional trade community. The MB5B Tester Bag, designed for technicians outside of the United States, has been optimised for safely storing a Multifunction Tester (MFT) inside the bag while also accommodating hand tools in any of the exterior pockets.
MB5B Tester Bag comes with 1x Front Padded Panel, 1x Rear Padded Panel and 1x Large Side Pocket Inserts, 1x PB2-8 MAG Parts Bags and 1x MFT Accessory Box included with purchase. Additional Panels sold separately.
Add a custom panel to your bag
Panels
Panels
Panels
Accessories
Accessories
Accessories
Other
| PRODUCT SPECIFICATIONS | Width: 380mm Depth: 255mm Height: 390mm Weight (empty): 4kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | 21 exterior tool pockets Rear padded tablet computer pocket Detachable/optional backpack straps 2 padded side-mounted meter or tool pockets with repositionable interior pockets V-SWAP™ removable component system – choose from several included or optional panels Removable storage box & adjustable height shelf for accommodating a Multifunction Tester Pair of 8in/20cm magnetic parts bags for leads and fittings “Hang-up” hook – accessible while open and closed Over-moulded rubber grip 8" electrical tape strap Polypropylene plastic base for moisture and abrasion protection |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Only logged in customers who have purchased this product may leave a review.
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Tool Pouches
Backpack Tool Bags
Backpack Tool Bags
Everyday Carry (EDC)
Reviews
There are no reviews yet.