PB2-8 MAG
$79.00
(VPP10525)
A string of magnets along the back of PB2-8 MAG Parts Bags adds a surprising amount of functionality. Not only do the magnets enable the pair to secure to one another, each magnetized pouch can attach to the steel mounting plate integrated in the TP-XXL (all colourways), TP-XD BLACKOUT & TP-XL (all colourways).
A string of magnets along the back of PB2-8 MAG Parts Bags adds a surprising amount of functionality. Not only do the magnets enable the pair to secure to one another, each magnetised pouch can attach to the steel mounting plate integrated in the TP-XXL (all colourways), TP-XD BLACKOUT & TP-XL (all colourways). When on the go the pouches can secure themselves to a substructure keeping small parts, test leads or precision tools within hand’s reach. The magnets can also temporarily keep loose fasteners secured and ready for reassembly.
| PRODUCT SPECIFICATIONS | Height: 140mm Width: 200mm Depth: 10mm |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | Pair of 8"/20cm long pouches Integrated magnets for connecting to one another or other tool bag Multi-purpose for jobsite and everyday use Zippered access Stores small tools, fasteners, wire nuts, & assorted other items YKK™ Zippers & 600 Denier Nylon body fabric Transparent side coated mesh sides |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Only logged in customers who have purchased this product may leave a review.
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Reviews
There are no reviews yet.