OC45
$79.00
(VPP10516)
The OC Cases are an ideal add-on for our larger toolbags or as a stand-alone storage solution. Each case provides a semi-rigid protective shell for specialised tools and electronics.
SEE OUR V-SWAP™ PANELS OPTIONS BELOW
Veto Pro Pac’s proprietary V-SWAP™ system enables quick customisation for the needed tools, gear and equipment.
The OC Cases are an ideal add-on for our larger toolbags or as a stand-alone storage solution. Each case provides a semi-rigid protective shell for specialised tools and electronics. With a number of available V-SWAP panels (sold separately), each case can be outfitted with a number of different organizational components.  The OC45 includes an exclusive double-gated carabiner that can connect in multiple locations. For any project, you can include no panels, 1 panel or any two panels. There are 21 possible configurations for the OC45.
Add a custom panel to your bag
Panels
Panels
| PRODUCT SPECIFICATIONS | Exterior Height: : 450mm Interior Height: 370mm Exterior Width: 210mm Interior Width: 190mm Exterior Depth: 125mm Interior Depth: 100mm Weight (empty): 0.25kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | Small semi-rigid protective clam shell case Ruggedised exterior with moisture resistant bottom Included double-gated carabiner for hanging case while open or closed Fully customizable interior via several optional interior panel configurations available & sold separately Rear molle accepts optional repositionable stainless steel clip (RBC) for attaching to belt or tool bag |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Only logged in customers who have purchased this product may leave a review.
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Reviews
There are no reviews yet.