CB-LDP
$383.00
(VPP10986)
The CB-LDP is similar to the CB-LD except it is slightly taller, had side meter pockets and include a removable sling strap so the user can wear it as a crossbody sling bag. This bag was inspired by customer requests for a smaller, more compact version of the MB5B with similar internal storage.
The CB-LDP is similar to the CB-LD except it is slightly taller, had side meter pockets and include a removable sling strap so the user can wear it as a crossbody sling bag. This bag was inspired by customer requests for a smaller, more compact version of the MB5B with similar internal storage.
| PRODUCT SPECIFICATIONS | Height: 380mm Width: 355mm Depth: 268mm Weight (empty) 2.6kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | 42 Total exterior and interior pockets 2 Padded side-mounted meter or tool pockets Front zipped access pocket with internal organisation 1 Metal tape clip holder “Hang-up” hook Rear padded tablet pocket Detachable over-moulded elastomeric grip YKK® zips Impact and waterproof polypropylene plastic base for moisture and abrasion protection Tablet pocket dimensions: 8”h x 6”w x 2.5”d |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Open Top Tool Bags
Blackout Range
Camo
Tech Tool Bags
