TECH-LCT BLACKOUT
$503.80
(VPP10721)
The TECH-LCT BLACKOUT is a “blacked-out” closed top tool bag designed to accommodate technicians’ tools and work routines.
TECH-LCT BLACKOUT comes with 1x Tool Panel and 1x Meter Panel included with purchase.
SEE OUR V-SWAP™ PANELS OPTIONS BELOW
Veto Pro Pac’s proprietary V-SWAP™ system enables quick customisation for the needed tools, gear and equipment.
The TECH-LCT BLACKOUT is a “blacked-out” closed top tool bag designed to accommodate technicians’ tools and work routines. This weatherproof, large-sized service technician’s tool bag organises, stores and protects hand tools and meters, making service calls or system installs quicker and more efficient. The TECH-LCT BLACKOUT tool bag sports up to 55 interior and exterior pockets with ample room for hand tools, parts boxes, meter, a cordless impact drill and other bulkier items.
The TECH-LCT BLACKOUT features our V-SWAP™ system, allowing for customisation of the interior pocket layout by simply swapping panels for different storage layouts. Standing at 15″ tall, this bag is great for tradespeople who want to store large tools and equipment in a closed-top tool bag.
NOTE: THIS BAG COMES WITH THE TOOL AND METER PANEL. Additional panels sold separately.
Add a custom panel to your bag
Bulk
Laptop
Meter
Panels
| PRODUCT SPECIFICATIONS | Height: 380mm Width: 380mm Depth: 240mm Weight (empty): 4.3kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | 55 Interior and Exterior Pockets of various sizes Neoprene Pockets for Meters and Larger tools Outside large pocket for bits and small tools Back tool panel has room for cordless drills 8” electrical tape strap Waterproof polypropylene base for moisture and abrasion protection YKK® Zippers |
| OTHER FEATURES | 5-Year Limited warranty |
Only logged in customers who have purchased this product may leave a review.
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Open Top Tool Bags
Tech Tool Bags
Infrared Range
Tech Tool Bags
Reviews
There are no reviews yet.