Wrencher XL
$545.00
The WRENCHER-XL is an extra-large sized open top plumbing bag, which features four vertical storage zones for large pipe wrenches and channel locks.
One or both of the included interior V-SWAP™ pocket panels (Tool Panel and Tank Panel) can be removed, creating additional space for bulky tools or large fittings.
All WRENCHER bags feature a water-repelling tarpaulin interior for easy clean up, and an injection molded waterproof base.
The WRENCHER XL is an extra-large sized open top plumbing bag, which features four vertical storage zones for large pipe wrenches and channel locks.
One or both of the included interior V-SWAP™ pocket panels (Tool Panel and Tank Panel) can be removed, creating additional space for bulky tools or large fittings. Additional panels may be purchased.
Included is a compact zippered pouch that can be removed, stuffed and magnetically secured into a rear pants pocket, over a belt, or proposed up and kept within hand’s-reach. All WRENCHER bags feature a water-repelling tarpaulin interior for easy clean up, and an injection molded waterproof base.
| Weight | 6 kg |
|---|---|
| PRODUCT SPECIFICATIONS | Height: 430mm Width: 430mm Depth: 330mm Handle Height (HH): 580mm Weight (empty): 6 kg Internal Volume: 37L Max Payload: 36kg |
| MAXIMIZED TOOL STORAGE CAPACITY | Easily cleaned tarpaulin interior repels water Leather carrying grips 17 available interior & exterior pockets Synthetic rubber bumper protects opening of bag during insertion of large tools 4 vertical storage shafts with stainless steel tool deflector partitions & padded floor for oversized wrenches V-SWAP™ removable tool pocket panel system provides expandible bulk storage capacity or up to 10 interior pockets for hand tools & a Removable zippered pouch provides 7 additional secured pockets Waterproof Polypropylene plastic base for moisture and abrasion protection |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Contractor
Contractor
Contractor
Contractor