Wheeler Hoist Strap
$55.00
(VPP10220)
The WHEELER HOIST STRAP installs onto all Veto Pro Pac Wheeler bags to provide an attachment point to confidently hoist large tool bags up to a rooftop or other overhead location and onto a stable surface. The strap attaches via the 2″ D-ring hoist points integral to all large Veto Pro Pac tool bags. Each strap ships with a PB4 pouch to keep the strap free of debris in between uses.
In stock
What goes up, must come down… safely & securely. The WHEELER HOIST STRAP installs onto all Veto Pro Pac Wheeler bags to provide an attachment point to confidently hoist large tool bags up to a rooftop or other overhead location and onto a stable surface. The strap attaches via the 2″ D-ring hoist points integral to all large Veto Pro Pac tool bags. Each strap ships with a PB4 pouch to keep the strap free of debris in between uses.  The strap is not required simply for lifting bags off the ground for regular carrying and transport, as Wheeler handles may be used for this purpose.Â
| PRODUCT SPECIFICATIONS | Integral instructions for installation Secures to 2" D-rings on tool bag Reinforced eyelets Includes PB4 pouch for storing |
|---|
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Accessories
Accessories
Accessories
Wheeled Tool Bags
