TECH PAC P INFRARED
$654.00
(VPP10957)
The TECH PAC P INFRARED is a large tool backpack in the new black and red color scheme. Identical in construction and storage capacity to the TECH PAC BLACKOUT, with the addition of side pockets for separate meter or tool storage.
TECH PAC P INFRARED comes with 1x Tool Panel and 1x Meter Panel included with purchase.
SEE OUR V-SWAP™ PANELS OPTIONS BELOW
Veto Pro Pac’s proprietary V-SWAP™ system enables quick customisation for the needed tools, gear and equipment.
In stock
The TECH PAC P INFRARED is a large tool backpack in the new black and red color scheme. Identical in construction and storage capacity to the TECH PAC BLACKOUT, with the addition of side pockets for separate meter or tool storage. Each zippered side pocket measures 13″ x 4″ x 2″. The bag also features external daisy chains for attaching pouches and accessories, as well as Velcro ideal for personalizing with morale patches. The TECH PAC P INFRARED features Veto Pro Pac’s proprietary V-SWAP™ system of interchangeable panels and includes the Tool Panel and Meter Pocket Panel. Additional panels are sold separately, allowing alternative configurations to enable tool, gear, or job-specific storage solutions.
Add a custom panel to your bag
Panels
Panels
Panels
Panels
Laptop
Bulk
Meter
| PRODUCT SPECIFICATIONS | Height: 483mm Width: 470mm Depth: 255mm Weight (empty): 6.1kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | V-SWAP™ removable tool pocket panel system Includes tool & meter panels; alternate V-SWAP™ panels available and sold separately INFRARED color scheme External daisy chain for attaching pouches and accessories External Velcro loop for attaching patches 2 external side meter pockets Exterior manifold gauge & hose storage pocket Interior magnetic screw catcher Thermoformed cushioned EVA back pad Quick release metal hasp supports load & allows easy access to rear storage bay YKK® zippers |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Only logged in customers who have purchased this product may leave a review.
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Infrared Range
Backpack Tool Bags
Open Top Tool Bags
Tech Tool Bags
Reviews
There are no reviews yet.