MB3TB
$317.00
(VPP10979)
NEW – COMING SOON (ETA: October)
The MB3TB is a large, compact sling-style meter and tool bag, built on an impact and water-resistant injection molded polypropylene base. Designed to store, transport, and protect large meters- including digital manifolds and meters up to 13.5” (34 cm) tall.
Out of stock
Want to know when it's back in stock?
The MB3TB is a large, compact sling-style meter and tool bag, built on an impact and water-resistant injection molded polypropylene base. Designed to store, transport, and protect large meters- including digital manifolds and meters up to 13.5” (34 cm) tall – it also includes a pair of removable tool pocket inserts (V-SWAP Large Side Pocket Inserts) that provide up to six vertical storage pockets for hand tools in the main compartment.
The back and interior pockets are suitable for storing wireless probes. It features a removable sling strap and carrying handle, allowing you to use it as either a sling bag or carry it at your side. Removable backpack straps (sold separately) allow you to convert the MB3TB into a small, compact backpack.
| PRODUCT SPECIFICATIONS | Height: 355mm Width: 280mm Depth: 178mm Weight (empty): 1.9kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | Large main pocket with 5 padded interior pockets A pair of removable tool pocket inserts that provide up to 6 vertical storage pockets for hand tools in the main compartment Up to 25 available internal and external Rear padded pocket for small tablet, probes, or additional tools Impact and water-resistant injection moulded base Removable Sling-Style Shoulder Strap Detachable carrying handle "Hang-up" hook 4 D-rings Electrical tape strap YKK® Zippers |
| OTHER FEATURES | Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Tool Pouches
Tool Pouches
Blackout Range
Backpack Tool Bags
