This compact tool bag is designed for technicians and tradesmen.
The Veto LC has the versatility to organize, store and protect a variety of hand tools, meters, butt-sets and more. It offers transport-plane-like storage with 57 pockets capable of handling 75 hand tools
| PRODUCT SPECIFICATIONS | Width: 240mm Length: 340mm Height: 300mm (Handle Folded Down) Weight (empty): 3.3kg |
|---|---|
| MAXIMIZED TOOL STORAGE CAPACITY | Vertical Tool Pockets (inside): 48 inside & 3 outside Flat Zippered Pockets (outside): 4 inside & 2 outside Neoprene Pockets: none D-Rings: 4 large and 5 small Exterior Electrical Tape Loop: 8” Fabric with Clip Closure Stainless Steel Tape Clip: Yes |
| RUGGED MATERIALS & CONSTRUCTION | Waterproof Base: 3mm Injection Molded Polypropylene Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon Handle: Injection Molded Nylon Plastic w/ over-molded rubber grip Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs Fold-Back Snaps: 6 zinc, marine grade D-Rings: Powder Coated Steel Rivets: 38 zinc, marine grade rivets Stitching: Industrial Strength Double Nylon Stitching |
| OTHER FEATURES | Shoulder Strap: Heavy Duty, Non-Slip Padded Shoulder Strap with Velcro Handle connection Warranty: 5 Years (see Veto warranty terms and conditions) |
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!
Related products
Tech
Contractor
Contractor
Contractor