The Veto DR-LC is a compact gate mouth style bag with a padded adjustable panel system to secure chargers and batteries for cordless power tools. You can also take the internal panel system out and use it as a go-to tool bag.
Height: 293mm (with handle folded down)
Weight: 2.3kg (empty)
|MAXIMIZED TOOL STORAGE CAPACITY||
Vertical tool pockets: 27 exterior tool pockets of various sizes
Customisable and removable velcro panel system
Heavy duty shoulder strap
Manifold gauge and hose storage space
Metal YKK zippers
4 powder coated steel D-rings
|RUGGED MATERIALS & CONSTRUCTION||
Waterproof Base: 3mm injection molded polypropylene
Waterproof body fabric: 1800 PVC impregnated denier nylon
Waterproof tool pocket fabric: 1800 PVC impregnated denier nylon
Handle: injection molded nylon plastic w/ over-molded rubber grip
Zippers: double stitched, heavy duty (interlocking) YKK with oversized zipper tabs
Rivets: zinc, marine grade rivets
Stitching: industrial strength double nylon stitching
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
PROTECT THE ZIPPERS FROM SHARP OBJECTS AND/OR EXCESSIVE HEAT
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
DON'T OVERSTUFF THE BAG
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!